Welcome to g4izh.co.uk
  • Home
  • Mods
    • BM800 Microphone Mods
    • Trio TS-700 Conversion to 4m
    • Trio TS-700 CW Mods
    • Yaesu FT-290R Conversion to 4m
    • Yaesu FT-847, 4m Mods
    • Mitsubishi RA35H1516M PA Module conversion to 4m
  • Construction
    • The "Pixie" CW Transceiver
    • 144Mc/s Band Pass Filter
    • Indoor Mag Loop for HF
    • Remote Balanced Aerial Matching Unit
    • 70Mc/s Low Pass Filter
    • Simple 4m Pre-Amp
    • 144 to 1296 Mc/s Transverter
  • Icom IC-7300 Mods
    • Overview >
      • Microphone Input arrangement
    • HF/VHF Aerial Changeover Unit
    • "Noisy" Fan Mod
    • Multi-Function Mouse Controller
    • TX "Tone" Levels
    • "Push Button" Tune Mod
    • Desk Microphone
    • DC Power Cable Change
    • Multi-Function Control Unit (SP-38)
    • 144Mc/s Transverter
    • Clock Back Up Battery Replacement
  • All AM Projects
    • 807 Linear Amplifier
    • HV Power Supply
    • R107 Receiver
    • 60/80 metre AM Transmitter
    • AM Specific Microphone
    • Retekess V111 AM Receiver
    • My first AM Station
  • Motorbikes
    • My Bikes since 1971
    • My Biking Pictures
  • For Sale
    • 5.317Mc/s Signal Source
    • 3.615Mc/s Signal Source
    • 80/60m AM and CW Crystals
    • HC6U Crystals for 80/160m
    • Mobile Impedance Transformer
1                             80m, 3.615Mc/s Crystal Controlled Signal Source for AM

This is a 3.615Mc/s crystal controlled oscillator followed by a loosely coupled buffer stage for a high level of isolation and stability for use as an accurate signal source or the first stage of an 80m AM transmitter. The unit is very similar to the 60m version with some component changes. It is based on the "Pixie" pcb but with many component changes to suit this purpose.  The board measures 2" square and is supplied with the dc supply and output leads which plug in to the board. The crystal fitted to the board is a 3.615Mc/s, HC49U with 30pF parallel loading with a frequency stability of +/- 10ppm between -10 and +60C. 

The DC supply to the board is 9 to 14v and it outputs a pure sine wave of about 5v Peak to Peak at 13.8v.

​The board is reverse polarity protected as long a fuse of no more than 250mA is in the supply line.
 
These are available to the UK ONLY at a cost of £22 including postage.
Payment is by bank transfer ONLY. In the first instance please e mail me   g4izh@yahoo.co.uk  to check availability as there are only 3 made.
                                   1 Left 10/4/2021
NB, I no longer use PayPal for a host of reasons. 
Picture
































































































​
Powered by Create your own unique website with customizable templates.